Maxi WAVE 垂直電気泳動, MV-20WAVESYS
製品説明
The Maxi WAVE Vertical Electrophoresis System is our latest product innovation for large-format vertical gel electrophoresis. Designed to perform a variety of separations, including first-and second-dimension SDS-PAGE, native, preparative, gradient and high-resolution nucleic acid electrophoresis, plus capillary tube gel IEF and electroblotting, the MV-20WAVESYS is one of the most versatile maxi vertical systems available.
By introducing innovative, new vertical screw-clamp technology within the PAGE insert only four screws are now necessary to secure as many 20x20 gels. This gives the MV-20WAVE system the elective advantage of a much faster set up speed compared to competitor products whose traditional clamping configurations require as many as 24 screws to secure just two glass plates.
In addition, the WAVE's vertical screw-clamp configuration distributes pressure evenly along the height of the gel rather than in the center to eliminate plate bowing and gel compression, but still maintains a leak-proof seal during casting; while the ergonomic wave-like design of the PAGE insert aids both handling and set up.
MS02_Electrophoresis* Marketing video
- More gels run 2 to 4 gels simultaneously
- Customize your system for second-dimension runs with 180mm IPG strips and gels using the IEF conversion kit
- Utilize modular inserts with the same universal tank and lid to extend the application of your standard WAVE unit to create a complete 2-D or blotting system.
- Vertical screw clamps distribute pressure evenly along the height of the gel to prevent plate bowing and gel compression
- Glass plates compress gently against a flat, level gasket to prevent current leakage from the inner buffer chamber during electrophoresis
- Detachable inner cooling coil connects to the laboratory water supply or a recirculating chiller to provide uniform, smile-free electrophoresis, while allowing runs to be performed at higher voltage
- Deep gel tank with adequate clearance beneath the glass plates to allow a magnetic stirrer to maintain buffer recirculation and uniform pH
- Dual purpose PAGE insert eliminates time-consuming transfer of glass plates between separate casting and running modules
- Ground glass plates with bonded injection moulded spacers consistent with comb thickness ensure "clean" well formation, as well as the correct alignment for leak-free casting; also eliminate the need for easily mislaid and awkward to use spacer aligners
- Ultra-soft silicone mat within cam-caster compensates for glass plate misalignment to ensure leak-free casting
- Widest selection of combs allow separation of up to 192 samples
- Asymmetric lid design and color-coded screw pins in PAGE insert prevent polarity reversal
WAVE Maxi Vertical Component parts
1. Lid and power cables
2. PAGE insert
3. Vertical screw-pin
4. Clamping bars
5. Glass plates
6. Inner buffer chamber
7. Gasket
8. Detachable cooling coil
9. Outer tank
10. Cam-pin caster
11. Ultra-soft casting mat
12. Combs
* All images are for reference only, actual products might differ from the pictures above.
* Technical specifications subject to change without notice.
| Cat. No. | MV-20WAVESYS | |
|---|---|---|
| Dimension (WxLxH) | Approx. 11.8"x7.1"x10.9" (300x180x270mm) | |
| Plate Dimension (WxL) | Approx. 7.9"x7.9"x0.2" (200x200x4mm) | |
| Gel Dimension (WxL) | Approx. 6.3"x6.9" (160x175mm) | |
| Maximum Sample | 192 samples, 48 samples per gel | |
| Total Buffer Volume | 4.8~5.3L | |
| Total Volume Inner Buffer Chamber | 640ml | |
| Cooling Method | Cooling coil | |
| Dummy Plate And Casting Base | Yes | |
| Construction | Injection molded construction; Durable, leak proof environment for complete safety and long life |
|
| Electrical Safety | Lid can only be fastened in one way; On removal, power is disconnected from buffer chamber |
|
| Rapid Casting Gel | Use casting dams | |
| Cat. No. | Product Description |
|---|---|
| MV-20WAVESYS | Complete Maxi WAVE Vertical Gel Electrophoresis Apparatus, Maxi WAVE 200x200mm Dual, sets of glass plates with 1mm thick bonded spacers, 2x24 sample, 1mm thick combs, cooling coil, dummy plate and casting base |
| Bundle Packages | |
| Mini500-CP-03 | Package of Mini-500 and MV-20WAVESYS |
Pakage of MINI-500 + MV-20WAVESYS
| Cat. No | Description |
|---|---|
| MV-20WAVE-EC | MV20 WAVE External Casting Stand - No Casting Base |
| MV-20WAVECAST | MV20WAVE Casting Base |
| MV-20WAVEDIRM | MV20wave Page insert |
| MV-20WAVE-CC | Detachable Cooling Coil |
| MV-20DCAST | Maxi, casting base for MV-10WDSYS and MV-20DSYS |
| MV-20DCASTM | Replacement Rubber mats for MV-10WDSYS and MV-20DSYS casting base |
| MV-20DIRM | Maxi, Inner Running Module |
| MV-20ICB | Maxi Cooling Block. |
| MV-20LID | MV-20 lid (No cables) |
| MV-20TANK | MV-20 Tank |
| MV-20NG | 20 x 20cm Notched Glass Plates 4mm thick ( Pack of 2) |
| MV-20PG | 20 x 20cm Plain Glass Plates 4mm thick ( Pack of 2) |
| MV-20PGS0.75 | 20 x 20cm Plain Glass Plates with 0.75mm Bonded Spacers (Pack of 2) |
| MV-20PGS1 | 20 x 20cm Plain Glass Plates with 1mm Bonded Spacers ( Pack of 2) |
| MV-20PGS1.5 | 20 x 20cm Plain Glass Plates with 1.5mm Bonded Spacers (Paxk of 2) |
| MV-20PGS2 | 20 x 20cm Plain Glass Plates with 2mm Bonded Spacers (Pack of 2) |
| MV-20NGS0.75 | 20 x 20cm Notched Glass Plates with 0.75mm Bonded Spacers (Pack of 2) |
| MV-20NGS1 | 20 x 20cm Notched Glass Plates with 1mm Bonded Spacers ( Pack of 2) |
| MV-20DP | Dummy Plate, 20 x 20cm |
| MV-20S0.75 | 20cm Spacers - 0.75mm (Pack of 2) |
| MV-20S1 | 20cm Spacers - 1mm thick (Pack of 2) |
| MV-20S1.5 | 20cm Spacers - 1.5mm thick (Pack of 2) |
| MV-20S2 | 20cm Spacers - 2mm thick (Pack of 2) |
| Optional combs | |
| MV-20-1-0.75 | Comb 1 Prep, 1 Marker, 0.75mm thick |
| MV-20-5-0.75 | Comb 5 sample, 0.75mm thick |
| MV-20-10-0.75 | Comb 10 sample, 0.75mm thick |
| MV-20-18MC-0.75 | Comb 18 sample MC, 0.75mm thick |
| MV-20-24-0.75 | Comb 24 sample, 0.75mm thick |
| MV-20-30-0.75 | Comb 30 sample, 0.75mm thick |
| MV-20-36MC-0.75 | Comb 36 sampl MC, 0.75mm thick |
| MV-20-48-0.75 | Comb 48 sample, 0.75mm thick |
| MV-20-1-1 | Comb 1 Prep, 1 Marker, 1mm thick |
| MV-20-5-1 | Comb 5 sample, 1mm thick |
| MV-20-10-1 | Comb 10 sample, 1mm thick |
| MV-20-18MC-1 | Comb 18 sample MC, 1mm thick |
| MV-20-24-1 | Comb 24 sample, 1mm thick |
| MV-20-30-1 | Comb 30 sample, 1mm thick |
| MV-20-36MC-1 | Comb 36 sampl MC, 1mm thick |
| MV-20-48-1 | Comb 48 sample, 1mm thick |
| MV-20-1-1.5 | Comb 1 Prep, 1 Marker, 1.5mm thick |
| MV-20-5-1.5 | Comb 5 sample, 1.5mm thick |
| MV-20-10-1.5 | Comb 10 sample, 1.5mm thick |
| MV-20-18MC-1.5 | Comb 18 sample MC, 1.5mm thick |
| MV-20-24-1.5 | Comb 24 sample, 1.5mm thick |
| MV-20-30-1.5 | Comb 30 sample, 1.5mm thick |
| MV-20-36MC-1.5 | Comb 36 sampl MC, 1.5mm thick |
| MV-20-48-1.5 | Comb 48 sample, 1.5mm thick |
| MV-20-1-2 | Comb 1 Prep, 1 Marker, 2mm thick |
| MV-20-5-2 | Comb 5 sample, 2mm thick |
| MV-20-10-2 | Comb 10 sample, 2mm thick |
| MV-20-18MC-2 | Comb 18 sample MC, 2mm thick |
| MV-20-24-2 | Comb 24 sample, 2mm thick |
| MV-20-30-2 | Comb 30 sample, 2mm thick |
| MV-20-36MC-2 | Comb 36 sampl MC, 2mm thick |
| MV-20-48-2 | Comb 48 sample, 2mm thick |
